Flexim FLUXUS G608 - Detection of the Flow Direction; Stopping the Measurement

11 Basic Measurement FLUXUS G60x
UMFLUXUS_G6V4-2EN, 2011-03-29 83
11.8 Detection of the Flow Direction
The flow direction in the pipe can be detected with the help of the displayed volumetric
flow rate in conjunction with the arrow on the transducers:
• The medium flows in the direction of the arrow if the displayed volumetric flow rate is
positive (e.g. 54.5 m
3
/h).
• The medium flows against the direction of the arrow if the displayed volumetric flow
rate is negative (e.g. -54.5 m
3
/h).
11.9 Stopping the Measurement
The measurement will be interrupted by pressing key BRK.
Note! Be careful not to stop a current measurement by inadvertently
pressing key BRK!