Flexim FLUXUS G608 - Page 182

182 UMFLUXUS_G6V4-2EN, 2011-03-29
FLUXUS G60x A Menu Structure
activation of the storing of the signal amplitude
The value will only be stored if the data logger is
activated.
x
activation of the storing of the sound speed of
the medium
The value will only be stored if the data logger is
activated.
x
activation of an acoustic signal every time a
measured value is stored or transmitted
x
SYSTEM settings\serial transmis.
selection of the displays for the formatting of the
serial transmission of measured values
activation of the serial transmission of data with/
without blanks
selection of the decimal marker for floating point
numbers
selection of the character for column separation
SYSTEM settings\Miscellaneous
selection of the display for the setting of the
contrast
setting of the contrast of the display
cold start
resistant
Store Amplitude
off >ON<
Store c-Medium
off >ON<
Beep on storage
>ON< off
SYSTEM settings ↕
serial transmis.
SER:kill spaces
off >ON<
SER:decimalpoint
’.’ >’,’<
SER:col-separat.
’;’ >’TAB’<
SYSTEM settings ↕
Miscellaneous
SETUP DISPLAY
 CONTRAST 