Flexim FLUXUS G608 - Page 184

184 UMFLUXUS_G6V4-2EN, 2011-03-29
FLUXUS G60x A Menu Structure
confirmation for the deleting of a parameter re-
cord
Print Meas.Val.
selection of the displays for the transmission of
stored measured values to a PC
start of the transmission of measured values
This display will only be indicated if the data log-
ger contains measured values and the transmit-
ter is connected to a PC via a serial cable.
display of the data transmission progress
Delete Meas.Val.
selection of the displays for the deleting of
stored measured values
confirmation for the deleting of measured val-
ues
This display will only be indicated if measured
values are stored in the data logger.
Battery status
selection of the displays for the charging of the
battery
display of the charge state of the battery
If RELEARN is displayed, a relearn cycle is rec-
ommended.
display of the charge state of the battery
cold start
resistant
Really Delete?
no >YES<
Special Funct. ↕
Print Meas.Val.
Send Header 01
................

................
Special Funct. ↕
Delete Meas.Val.
Really Delete?
no >YES<
Special Funct. ↕
Battery status
 ?73‰-
RELEARN! Cy: 24
 30‰-
Cy: 1