FoxGate S6424-S2C2 series User Manual

Monitor Link Configuration
253
Group 1:
UplinkID UplinkStatus
e1/0/1 UP
DownlinkID DownlinkStatus
e1/0/2 UP
When there is failure between Device A and Device B，show Flex Links and Monitor Link in
Device B：
Device-B(config)#show monitor-link-group
Monitor-link Group
--------------------------------------------------
Group 1:
UplinkID UplinkStatus
e1/0/1 DOWN
DownlinkID DownlinkStatus
e1/0/2 DOWN
Device-B(config)#show mac-address-table move update
Dst mac-address: : 01:80:c2:00:00:10
Default/Current settings: : Rcv Off/On,Xmt Off/Off
Rcv Count: : 0
Xmt Count: : 0
show Flex Links and Monitor Link in Device C：
Device-C(config)#show interface switchport backup
ActiveInterface BackupInterface State
----------------------------------------------------------
e1/0/1 e1/0/2 active Standby /backup up
Preemption mode: Forced
Preemption Delay: 5 seconds
Total record 1.
Device-C(config)#show mac-address-table move update
Dst mac-address: : 01:80:c2:00:00:10
Default/Current settings: : Rcv Off/Off,Xmt Off/On

FoxGate S6424-S2C2 series Specifications

General

Brand	FoxGate
Model	S6424-S2C2 series
Category	Switch
Language	English