Tools
334
Tools
5
Resolution
Set image quality for transmission.
Select from [Panel] (image quality selected on the control panel), [Standard (200x100 dpi)],
[Fine (200 dpi)], [Superfine (400 dpi)], and [Superfine (600 dpi)].
Cover Page
Select whether or not to send a fax or an Internet fax with a cover note attached. If
attached, specify comments on the sender and a recipient to be printed in the cover pages.
Comments must be registered in advance.
z
For information on comment registration, refer to "Add Fax Comment" (P.338).
1
Select [Print Cover Page].
2
Select [Comments].
3
Select any comment from the list of comments displayed under [Recipient’s Comment] and
[Sender’s Comment].
z
Select [ ] to display the previous screen or [ ] to display the next screen.
4
Select [Save]. The image of the Fax Cover Page is displayed.
5
Select [Save].
Maximum Image Size
Select the maximum image size from [A3], [B4], and [A4] to match the recipient's paper
size or available profile.
Delay Start
Set whether or not to use a delayed start transmission.
z
If the machine’s system clock is set to the 24-hour display, [AM] and [PM] do not appear. For information on the system clock, refer
to "Time" (P.164).
To Next Page
Loading...
