Fuji Xerox Document Centre 1100

5 Check Mailbox
186
Check Mailbox
5
Back Cover
Back cover can be attached to merged document.
z
Off
No back cover is attached.
z
On
Back cover is attached.
Front Cover Quantity
Displays the [Front Cover Quantity] screen.
For more information, refer to "Front Cover Quantity" (P.186).
Back Cover Quantity
Displays the [Back Cover Quantity] screen.
For more information, refer to "Front Cover Quantity" (P.186).
Paper Tray Settings
Displays the [Covers - Paper Tray Settings] screen.
Either [Front Cover Tray] or [Back Cover Tray] can be selected.
When [Bypass] is selected, the [Tray 5 (Bypass)] screen appears. For more information, refer to "[Tray 5
(Bypass)] Screen" (P.68).
Front Cover Quantity
You can set the number of front covers to be inserted within the range from 1 to 99.
Even when multiple number of sets are printed, the number of front covers
programmed here will be printed per set.
1 Set the number of front covers
using [ ]and [ ] or the numeric
keypad.