Fuji Xerox Document Centre 1100

Common Settings
305
Setups
10
All Services - Main Features
Set the layout of buttons that appear in the [All Services] screen when the <All
Services> button on the control panel is pressed. The layout of numbers shown on the
[All Services - Main Features] screen shows the layout of buttons on the [All Services]
screen.
If you select [(Not Set)], the selected button position will remain empty.
Note • It is not possible to assign the same feature to more than one button.
1 Select [All Services], and select
[Change Settings].
2 Select the button in the position
where you want to display a
feature.
Note • Select [ ] to display the
previous screen and select
[ ] to display the next screen.
3 Select the feature to be displayed.