EasyManua.ls Logo

Fuji Xerox Document Centre 1100

Fuji Xerox Document Centre 1100
624 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15 Problem Solving
508
Problem Solving
15
027-722
[Cause] The jobs was timed out during connection with an
application interface destination.An application linkage
destination does not exist.
[Remedy] Try to process the job flow.
027-724
[Cause] An application interface destination could not be
accessed.
[Remedy] Check whether an application interfaced (CentreWare
Flow Service) operates correctly. When it is operating,
check the log. When it is not operating, check the
network environments.
027-725
[Cause] A job operation failed using an application interface.
[Remedy] Check whether an application linked (CentreWare Flow
Service) operates correctly. When it is operating, check
the log. When it is not operating, check the network
environments.
027-726
[Cause] The job status is unclear during an application interface.
[Remedy] Flow Service) operates correctly. When it is operating,
check the log. When it is not operating, check the
network environments.
027-727
[Cause] A parameter is illegal during an application interface.
[Remedy] Try to process the job flow.
027-737

[Cause] An error occurred while reading data from the job
template pool server.
[Remedy] Check to see whether you have privileges for the
directory storing the job template.
027-739

[Cause] Unable to find the specified job template server.
[Remedy] Check the path name for the job template server.
027-740

[Cause] Unable to login to job template server.
[Remedy] Check the login user name and password.
027-741

[Cause] Unable to connect to job template server.
[Remedy] Have the network administrator check the network and
server environments.
027-742

[Cause] Unable to store job template due to insufficient hard disk
space.
[Remedy] Remove unnecessary data from the hard disk to
increase free disk space.
027-743

[Cause] The specified job template server is incorrect.
[Remedy] Check the settings for the job template server.
027-744

[Cause] There is a problem in the domain name of the job
template server.
[Remedy] Make sure that the DNS server connection and the
domain name are registered to the DNS server.
027-745

[Cause] The address of the DNS server is not registered on the
machine.
[Remedy] Either register the address of the DNS server on the
machine, or set the address of the job template server by
an IP address.
027-746

[Cause] The specified job template pool server protocol settings
are incorrect.
[Remedy] Set up the correct port.
Error Code
Category
Cause and Remedy
CPSMO

Table of Contents

Other manuals for Fuji Xerox Document Centre 1100

Related product manuals