15 Problem Solving
510
Problem Solving
15
071-210
[Cause] Paper Tray 1 malfunctioned.
[Remedy] Check the paper setting of Paper Tray 1 and power-
cycle the machine. If the tray is not improved by
performing the relevant remedy, contact our Customer
Support Center. Trays other than Paper Tray 1 can be
used.
072-210
[Cause] Paper Tray 2 malfunctioned.
[Remedy] Check the paper setting of Paper Tray 2 and power-
cycle the machine. If the tray is not improved by
performing the relevant remedy, contact our Customer
Support Center. Trays other than Paper Tray 2 can be
used.
073-210
[Cause] Paper Tray 3 malfunctioned.
[Remedy] Check the paper setting of Paper Tray 3 and power-
cycle the machine. If the tray is not improved by
performing the relevant remedy, contact our Customer
Support Center. Trays other than Paper Tray 3 can be
used.
074-210
[Cause] Paper Tray 4 malfunctioned.
[Remedy] Check the paper setting of Paper Tray 4 and power-
cycle the machine. If the tray is not improved by
performing the relevant remedy, contact our Customer
Support Center. Trays other than Paper Tray 4 can be
used.
075-210
075-211
[Cause] Paper Tray 5 (bypass) malfunctioned.
[Remedy] Power-cycle the machine. If the tray is not improved by
performing the relevant remedy, Contact our Customer
Support Center.
078-210
078-211
[Cause] High Capacity Feeder Tray (paper trays 6 to 7)
malfunctioned.
[Remedy] Check the paper setting of Paper Trays 6 to 7 and
power-cycle the machine. If the trays are not improved
by performing the relevant remedy, contact our
Customer Support Center. Trays other than Paper Trays
6 to 7 can be used.
078-213
078-214
[Cause] Paper Tray 5(bypass) malfunctioned.
[Remedy] Power-cycle the machine. If the tray is not improved by
performing the relevant remedy, contact our Customer
Support Center.
116-701
[Cause] 2 sided print could not be made.
[Remedy] Print each side.
116-702
[Cause] Printing was performed using a substitute font.
[Remedy] Check the print data.
116-703
[Cause] An error occurred during PostScript processing.
[Remedy] Either confirm the print data, or click [Spool Settings] on
the [Details] tab in the print driver to set bi-directional
communications off.
Error Code
Category
Cause and Remedy
CPSMO
To Next Page
Loading...
Need help?
General
