Output Format
91
Copy
3
îš„Binding Shift
Displays the [Booklet Creation - Binding Shift] screen.
For more information, refer to "[Booklet Creation - Binding Shift] Screen"(P.91).
îš„Finishing
Displays the [Booklet Creation-Finishing] screen.
For more information, refer to "[Booklet Creation-Finishing] screen." (P.91).
îš„Paper Tray Settings
Displays the [Booklet Creation - Paper Tray Settings] screen.
Select the paper tray from [Cover Tray] and [Text Tray]. Select trays with paper of the
same size and orientation for the text and the cover.
When [Bypass…] is selected, the [Tray 5 (Bypass)] screen appears. For more information, refer to
"[Tray 5 (Bypass)] Screen" (P.68).
îš„Subsets
Displays the [Booklet Creation - Subsets] screen.
For more information, refer to "[Booklet Creation -Subsets] screen" (P.92).
[Booklet Creation - Binding Shift] Screen
You can set the gutter within the range from 0 to 50 mm in increments of 1 mm.
1 Use [ ] and [ ] to specify a gutter
value.
[Booklet Creation-Finishing] screen.
When the booklet finisher D2 is installed, Bi-Fold or Bi-Fold + Stapling can be made.
1 Select any item.
To Next Page
Loading...
Need help?
General
