BX924 S4 Upgrade and Maintenance Manual 193
Processors
Ê Store the processor in a save place for later reuse.
V CAUTION!
Processors are extremely sensitive to electrostatic discharge and
must be handled with care. After a processor has been removed from
its protective sleeve or from its socket, place it upside down on a
nonconducting, antistatic surface. Never push a processor over a
surface.
Figure 73: Closing the load plate
Ê Carefully close the load plate over the empty processor socket.
V CAUTION!
Be careful not to touch or bend the spring contacts on the processor
socket.
To Next Page
Loading...
