Fujitsu ScanSnap N1800 User Manual

4.7 Configuring the Login-Related Settings
108
2. For [Authentication Mode], select an authentication mode.
When searching for authentication information in the LDAP server or local account,
the search order of authentication information can be selected.
3. For [Auto Login], select whether or not to enable automatic login.
4. When [Auto Login] is set to [On], enter a [User Name] and [Password].
The scanner follows the Active Directory user name format when authenticating the
user login.
z For users registered in the LDAP server
z When the [Server Type] of the LDAP server is [Active Directory] or [Active
Directory Global Catalog]
If [LDAP to Local] or [Local to LDAP] is selected, the operation becomes as
follows.
z If a password error occurred at the first authentication destination, the
authentication process moves to the next destination.
z If an authentication error occurred at the first and next authentication
destinations, a notification of the details of the error that occurred in the first
destination is sent.
z The automatic login setting is applied immediately after an administrator
logout. To change the settings while the [Auto Login] is [ON], perform
administrator login from the [Maintenance] window or perform the login via
the Admin Tool.
z If Central Admin is enabled in a scanner for which automatic login is enabled,
when the scanner is started or resumed from standby mode, preference is
given to checking for available scanner settings, add-in installs and system
settings in the Central Admin Server, over automatic login.
When scanner settings, Add-ins or system settings are available, they are
installed in the scanner. If the number of scanners connecting to the Central
Admin Server exceeds the maximum number possible, the installation is
skipped, and automatic login is performed.
Updates will be applied to the scanner when a logout is performed from the
[Administrator Login] window, when the scanner starts next time, or when the
scanner resumes from standby mode.
User Name Format Authentication Process
SAM Account Name
Does not contain @
Authenticate the user login name
(sAMAccountName).
Example: user
User Principal Name
Contains @
Authenticate the user login name
(userPrincipalName).
Example: user@example.com

Fujitsu ScanSnap N1800 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Output color depth	24 bit
ADF scan speed (color, A4)	20 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (color, A4)	20 ipm
Display	TFT
Scanner type	ADF scanner
Product color	Black, Grey
Display diagonal	8.4 \
Display resolution	1024 x 768 pixels
Scan to	E-mail, Fax, File, FTP, Image
Sensor type	CCD
Scan file formats	JPG, PDF, TIFF
Maximum duty cycle	12000 pages per month
Daily duty cycle (max)	2000 pages
Minimum scan area (ADF)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6, A7, A8
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	52 - 127 g/m²
Auto document feeder (ADF) input capacity	50 sheets
Safety	LDAP, LDAPS, FTPS, HTTPS
Cabling technology	10BASE-T, 100BASE-TX
Networking features	Fast Ethernet
Supported network protocols	TCP/IP, DHCP, SMTP, SMB, LDAP, NTP, FTP, HTTP
Input voltage	100-240 V
Power supply type	AC
Power consumption (off)	0.5 W
Power consumption (standby)	15 W
Power consumption (typical)	50 W
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Depth	226 mm
Width	300 mm
Height	172 mm
Weight	6000 g