Fujitsu ScanSnap N1800 User Manual

419
7.2 Cleaning the Exterior of the Scanner
■ Cleaning Parts Other Than the LCD Touch Panel
Parts other than the LCD touch panel, such as the exterior, the ADF paper chute and the
stacker, must be cleaned using a dry cloth or a cloth slightly moistened with Cleaner F1 or
a mild detergent. Cleaning Wipes can also be used.
■ Cleaning the LCD Touch Panel
To prevent the LCD touch panel screen from becoming dirty, it should be regularly
cleaned with a soft, dry cloth.
Take care when cleaning the LCD touch panel. It can be easily damaged, and should
never be scratched or banged with hard objects.
z Never use paint thinner or other organic solvents.
z Make sure that water does not get inside the scanner when cleaning.
z When a large amount of Cleaner F1 is used, it may take some time until it is dry.
Use an appropriate amount to moisten the cloths. Also, wipe off any extra cleaner
from the part by using a dry cloth.
Always use a dry (not damp) cloth to clean the screen.
If dust is allowed to collect and compact around the frame of the screen, it can cause
the LCD touch panel to malfunction.
Mild detergent or
Cleaner F1
Cloth
Paint thinner

Fujitsu ScanSnap N1800 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Output color depth	24 bit
ADF scan speed (color, A4)	20 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (color, A4)	20 ipm
Display	TFT
Scanner type	ADF scanner
Product color	Black, Grey
Display diagonal	8.4 \
Display resolution	1024 x 768 pixels
Scan to	E-mail, Fax, File, FTP, Image
Sensor type	CCD
Scan file formats	JPG, PDF, TIFF
Maximum duty cycle	12000 pages per month
Daily duty cycle (max)	2000 pages
Minimum scan area (ADF)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6, A7, A8
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	52 - 127 g/m²
Auto document feeder (ADF) input capacity	50 sheets
Safety	LDAP, LDAPS, FTPS, HTTPS
Cabling technology	10BASE-T, 100BASE-TX
Networking features	Fast Ethernet
Supported network protocols	TCP/IP, DHCP, SMTP, SMB, LDAP, NTP, FTP, HTTP
Input voltage	100-240 V
Power supply type	AC
Power consumption (off)	0.5 W
Power consumption (standby)	15 W
Power consumption (typical)	50 W
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Depth	226 mm
Width	300 mm
Height	172 mm
Weight	6000 g