EasyManuals Logo

Fujitsu ScanSnap N1800 User Manual

Fujitsu ScanSnap N1800
543 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #456 background imageLoading...
Page #456 background image
8.2 Network Connection Troubleshooting
456
8.2.3 Failure to Access the Scanner using a Web Browser, Admin Tool,
or Central Admin Server
If access is not possible when attempting to connect to the scanner using a Web browser
or the Admin Tool, or when attempting to connect to the Central Admin Server from the
Central Admin Console, try the following steps:
Action
Check if a network connection is possible by trying the same solution for
"Failure to Connect to a
Server Using Its IP Address" (page 451)
.
Action
Check the connectivity of the specified IP address.
If it is possible to connect the scanner using the Admin Tool with a specified IP address, specify
the scanner's IP address in the DNS or WINS server.
Check the DNS or WINS server settings using the Admin Tool or Web browser.
Action
If there is a firewall between the computer installed with the Admin Tool or Web browser and the
scanner, check that its settings are not preventing access.
Action
Set the scanner URL as a trusted site for Internet Explorer.
1. In Internet Explorer, set the following settings in the [Tools] menu, [Internet Options].
2. On the [Security] tab, select [Trusted sites] and press the [Sites] button.
3. Enter the URL of the scanner in the [Add this website to the zone] field, and press the [Add] button.
Same as in "Failure to Connect to a Server Using Its IP Address" (page
451).
The DNS server or WINS server is not functioning normally, or the
scanner name has not been registered in the DNS or WINS server.
A misconfigured firewall between the computer installed with the Admin
Tool or Web browser and the scanner is denying access.
The URL of the target scanner is not registered as a trusted site.

Table of Contents

Other manuals for Fujitsu ScanSnap N1800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu ScanSnap N1800 and is the answer not in the manual?

Fujitsu ScanSnap N1800 Specifications

General IconGeneral
Film scanningNo
Color scanningYes
Input color depth- bit
Maximum scan size216 x 356 mm
Output color depth24 bit
ADF scan speed (color, A4)20 ppm
Optical scanning resolution600 x 600 DPI
Duplex ADF scan speed (color, A4)20 ipm
DisplayTFT
Scanner typeADF scanner
Product colorBlack, Grey
Display diagonal8.4 \
Display resolution1024 x 768 pixels
Scan toE-mail, Fax, File, FTP, Image
Sensor typeCCD
Scan file formatsJPG, PDF, TIFF
Maximum duty cycle12000 pages per month
Daily duty cycle (max)2000 pages
Minimum scan area (ADF)50.8 x 50.8 mm
ISO A-series sizes (A0...A9)A4, A5, A6, A7, A8
Maximum ISO A-series paper sizeA4
Auto Document Feeder (ADF) media weight52 - 127 g/m²
Auto document feeder (ADF) input capacity50 sheets
SafetyLDAP, LDAPS, FTPS, HTTPS
Cabling technology10BASE-T, 100BASE-TX
Networking featuresFast Ethernet
Supported network protocolsTCP/IP, DHCP, SMTP, SMB, LDAP, NTP, FTP, HTTP
Input voltage100-240 V
Power supply typeAC
Power consumption (off)0.5 W
Power consumption (standby)15 W
Power consumption (typical)50 W
Sustainability certificatesENERGY STAR
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
CertificationRoHS
Weight and Dimensions IconWeight and Dimensions
Depth226 mm
Width300 mm
Height172 mm
Weight6000 g

Related product manuals