427
7.5.2 Checking the Consumable Alert Status
1. On the [Main Menu] or [Job Menu] window, press the [Consumable Alert]
button.
D The [Consumable Alert] window appears.
2. Check which part needs to be replaced and press the [OK] button.
Parts whose [Usage Counter] value is bigger than the [Replace at] value should be
replaced.
The value of the [Usage Counter] is in units of 500 sheets scanned.
For details on how to check the status of consumable parts on the administrator
window, refer to
"4.14.2 Viewing the Usage Status" (page 171).
3. Replace the part.
Refer to the following:
z Replacing the pad assy
"7.5.3 Replacing the Pad Assy" (page 428)
z Replacing the pick roller
"7.5.4 Replacing the Pick Roller" (page 430)
To Next Page
Loading...
