Fujitsu ScanSnap N1800 User Manual

6.9 Setting the Scan Options
388
6.9.17 Blank Page Skip
The scan process can be set to skip any blank pages in the scanned data.
For example, when a stack of documents containing both two-sided and one-sided
documents is scanned in duplex scan mode, this feature removes only the reverse side
(i.e. blank page) of one-sided documents from the scanned data.
1. On the [Scan Settings] window, select the [Advanced] tab.
2. Press the [Blank Page Skip] button.
D The [Blank Page Skip] window appears.
3. Select whether or not blank pages are to be skipped.
D This returns you to the [Scan Settings] window. The selected setting is displayed
to the right of the [Blank Page Skip] button.
z If the Brightness setting (see "6.9.12 Brightness" (page 383)) is set to [Dark] or
[Medium Dark], blank pages may not be recognized as such by the scanner.
z No scanned data is produced if all of the sheets in the document stack are
recognized as blank pages.
z The following types of documents may be accidentally recognized as blank pages.
Before discarding the scanned documents, make sure to check for pages
accidentally removed from the scanned data.
z Almost blank pages containing only a few characters
z Pages of only one color, white or other (including black)

Fujitsu ScanSnap N1800 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Output color depth	24 bit
ADF scan speed (color, A4)	20 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (color, A4)	20 ipm
Display	TFT
Scanner type	ADF scanner
Product color	Black, Grey
Display diagonal	8.4 \
Display resolution	1024 x 768 pixels
Scan to	E-mail, Fax, File, FTP, Image
Sensor type	CCD
Scan file formats	JPG, PDF, TIFF
Maximum duty cycle	12000 pages per month
Daily duty cycle (max)	2000 pages
Minimum scan area (ADF)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6, A7, A8
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	52 - 127 g/m²
Auto document feeder (ADF) input capacity	50 sheets
Safety	LDAP, LDAPS, FTPS, HTTPS
Cabling technology	10BASE-T, 100BASE-TX
Networking features	Fast Ethernet
Supported network protocols	TCP/IP, DHCP, SMTP, SMB, LDAP, NTP, FTP, HTTP
Input voltage	100-240 V
Power supply type	AC
Power consumption (off)	0.5 W
Power consumption (standby)	15 W
Power consumption (typical)	50 W
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Depth	226 mm
Width	300 mm
Height	172 mm
Weight	6000 g