Name: Fujitsu ScanSnap N1800
Brand: Fujitsu
Rating: 5 (1 reviews)

To Next Page

To Previous Page

285

5.17.4 Migrating Data to an Updated Version of the Central Admin

Server Software

When updating the Central Admin Server software version in order to use a different

server as the Central Admin Server, data from the previous version of the Central Admin

Server software must be transferred to the new version.

The data can be migrated by executing the "AmBackup.exe" and "AmRestore.exe"

commands in the computer in which the Central Admin Server software is installed.

1. Copy the following folder in the new version of the Central Admin Server

software to an arbitrary folder of the previous version.

In the following cases, overwrite the "ServiceSetting.dll" file in the Bin folder that

was copied to an arbitrary location in

Step 1, with the file of the same name from the

previous version of the Central Admin Server software.

z When migrating data from Windows Server 2003 to Windows Server 2008

z When migrating data from Windows Server 2008 to Windows Server 2003

The "ServiceSetting.dll" file is stored in the following location:

2. Execute "AmBackup.exe" in the [Bin] folder which was copied to an

arbitrary folder of the previous version of the Central Admin Server.

For details about "AmBackup.exe", refer to "5.17.1 Backing Up Central Admin

Server Settings" (page 281)

D The data of the previous version of the Central Admin Server is backed up.

If you back up data by executing "AmBackup.exe" in the [Bin] folder from the

installation folder of the previous version, you cannot restore the data in the new

version of the Central Admin Server.

z If updating the version of the current Central Admin Server software, you do not

need to migrate data.

z Make sure to export audit logs in advance, as they are not migrated by this

operation.

[\AmManager\Bin] folder in the installation folder of the new Central Admin Server

software

Under the [\AmManager\Bin] folder in the installation folder of the previous

Central Admin Server software

Fujitsu ScanSnap N1800 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Output color depth	24 bit
ADF scan speed (color, A4)	20 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (color, A4)	20 ipm
Display	TFT
Scanner type	ADF scanner
Product color	Black, Grey
Display diagonal	8.4 \
Display resolution	1024 x 768 pixels
Scan to	E-mail, Fax, File, FTP, Image
Sensor type	CCD
Scan file formats	JPG, PDF, TIFF
Maximum duty cycle	12000 pages per month
Daily duty cycle (max)	2000 pages
Minimum scan area (ADF)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6, A7, A8
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	52 - 127 g/m²
Auto document feeder (ADF) input capacity	50 sheets
Safety	LDAP, LDAPS, FTPS, HTTPS
Cabling technology	10BASE-T, 100BASE-TX
Networking features	Fast Ethernet
Supported network protocols	TCP/IP, DHCP, SMTP, SMB, LDAP, NTP, FTP, HTTP
Input voltage	100-240 V
Power supply type	AC
Power consumption (off)	0.5 W
Power consumption (standby)	15 W
Power consumption (typical)	50 W
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS