Fujitsu ScanSnap N1800 User Manual

305
6.2.3 Regular User Settings Overview
Regular users can configure the following setting items as long as these items have been
enabled by the administrator.
z Login Setting
Set the scanner to automatically login without displaying the [Login] window, when
the scanner power is switched on or restarted.
Also, set whether or not to enable login with the guest account.
To change these settings, contact the administrator.
z Initial Post-Login Menu
Set whether to display the [Main Menu] or [Job Menu] window.
Switch between the [Main Menu] and [Job Menu] windows, or display only the [Job
Menu] window.
z User Roaming Data
User settings can be shared between multiple scanners, by allowing user data to
be managed on the Central Admin Server.
A regular user can login on different scanners while retaining their user data.
The following user data can be used in roaming mode.
z "My List" e-Mail Address Books
z scan settings
z Name of the last network printer used (*)
z Name of the last network folder used (*)
z SharePoint folder (*)
z Job Roaming Info
User job settings can be shared between multiple scanners, by allowing job
settings to be managed on the Central Admin Server.
A regular user can login on different scanners while retaining their preferred [Job
Menu] window.
(*):
If the same network printer/folder, or SharePoint folder is not set for each
scanner, the name of the latest one used is not shown.
When Roaming Mode or Job Mode is [On] in the [Scanner Central Admin Server]
window of [Network Settings], if communication with the Central Admin Server is not
possible at login, a confirmation message will appear.
If the [OK] button is pressed, the settings saved in the scanner are used. Pressing
the [Cancel] button returns to the login window.

Fujitsu ScanSnap N1800 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Output color depth	24 bit
ADF scan speed (color, A4)	20 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (color, A4)	20 ipm
Display	TFT
Scanner type	ADF scanner
Product color	Black, Grey
Display diagonal	8.4 \
Display resolution	1024 x 768 pixels
Scan to	E-mail, Fax, File, FTP, Image
Sensor type	CCD
Scan file formats	JPG, PDF, TIFF
Maximum duty cycle	12000 pages per month
Daily duty cycle (max)	2000 pages
Minimum scan area (ADF)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6, A7, A8
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	52 - 127 g/m²
Auto document feeder (ADF) input capacity	50 sheets
Safety	LDAP, LDAPS, FTPS, HTTPS
Cabling technology	10BASE-T, 100BASE-TX
Networking features	Fast Ethernet
Supported network protocols	TCP/IP, DHCP, SMTP, SMB, LDAP, NTP, FTP, HTTP
Input voltage	100-240 V
Power supply type	AC
Power consumption (off)	0.5 W
Power consumption (standby)	15 W
Power consumption (typical)	50 W
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Depth	226 mm
Width	300 mm
Height	172 mm
Weight	6000 g