4.5 Configuring the System
96
4.5.2 Setting the Language
1. Select [System Settings]
J [Local Settings] J [Language Selection].
D The [Language Selection] window appears.
2. Select a language.
Select the desired language for the operating environment.
D This returns to the [Language Selection] window.
3. Press the [OK] button.
D A language setting confirmation message appears in the selected language.
4. Press the [OK] button.
You can select whether or not to display this window again at the next scanner
startup. To display the window again, for "Show the "Language Selection"
screen at next start up?", select [Yes]. To not display this window at next start
up, select [No].
To Next Page
Loading...
