Fujitsu ScanSnap N1800

4.17 Setting a Job Sequence
208
■ Deleting a Job Sequence
This section describes how to delete a job sequence.
1. Press the [Job Sequences] button.
D The [Jobs List] window appears.
2. Select the job sequence to be deleted.
3. Press the [Delete] button.
D The confirmation window appears.
4. Press the [OK] button.
D The job sequence is deleted.
■ Filtering Job Sequences
This section describes how to filter job sequences.
1. Press the [Job Sequences] button.
D The [Jobs List] window appears.
2. Enter [Job Name] and [Comment].
Enter either a part of or full [Job Name] and [Comment] for the job sequence(s) to
be filtered.
3. Press the [Find] button.
D The filtered results appear.
To clear filtered results, delete the entered [Job Name] and [Comment], and
press the [Find] button.