EasyManuals Logo

Fujitsu ScanSnap N1800 User Manual

Fujitsu ScanSnap N1800
543 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #446 background imageLoading...
Page #446 background image
8.2 Network Connection Troubleshooting
446
8.2 Network Connection Troubleshooting
If a network connection is not possible, first check the scanner status and system settings.
The following section provides information about general troubles that may occur when
connecting to a network.
If the cause of the problem is unknown or the problem persists, check the items in
"8.4
Points to Check before Contacting Your FUJITSU Scanner Dealer" (page 467)
and
contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service
provider.
8.2.1 Basic Network Operation Tests
The following network operation tests are available on the administrator window, and
should be performed after the network has been setup.
z Checking basic network operation with a Ping test
z Checking the network operating status
z Checking the NTP server settings by synchronizing the system time (if using an
NTP server)
z Checking the mail server by sending a test mail (if scanned data is to be sent as an
e-mail, by fax, or when requesting alert notifications by e-mail)
Checking Basic Network Operation with a Ping Test
Check the network connection status of the following computers and servers associated
with the network.
For details about the checking procedure, refer to
"4.8.6 Checking the Network
Connection with a Ping Test" (page 119)
.
z Computer with Admin Tool installed
z Computer with Central Admin Console installed
z Computer with Central Admin Server software installed
z Computer with User Editor installed
z DNS server
z WINS server
z NTP server
z LDAP server
z SMTP server
z File server
z FTP server
z Print server
z SharePoint server
z Domain controller
z Proxy server
Depending on the server setting, there may be no response from a Ping test.

Table of Contents

Other manuals for Fujitsu ScanSnap N1800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu ScanSnap N1800 and is the answer not in the manual?

Fujitsu ScanSnap N1800 Specifications

General IconGeneral
Film scanningNo
Color scanningYes
Input color depth- bit
Maximum scan size216 x 356 mm
Output color depth24 bit
ADF scan speed (color, A4)20 ppm
Optical scanning resolution600 x 600 DPI
Duplex ADF scan speed (color, A4)20 ipm
DisplayTFT
Scanner typeADF scanner
Product colorBlack, Grey
Display diagonal8.4 \
Display resolution1024 x 768 pixels
Scan toE-mail, Fax, File, FTP, Image
Sensor typeCCD
Scan file formatsJPG, PDF, TIFF
Maximum duty cycle12000 pages per month
Daily duty cycle (max)2000 pages
Minimum scan area (ADF)50.8 x 50.8 mm
ISO A-series sizes (A0...A9)A4, A5, A6, A7, A8
Maximum ISO A-series paper sizeA4
Auto Document Feeder (ADF) media weight52 - 127 g/m²
Auto document feeder (ADF) input capacity50 sheets
SafetyLDAP, LDAPS, FTPS, HTTPS
Cabling technology10BASE-T, 100BASE-TX
Networking featuresFast Ethernet
Supported network protocolsTCP/IP, DHCP, SMTP, SMB, LDAP, NTP, FTP, HTTP
Input voltage100-240 V
Power supply typeAC
Power consumption (off)0.5 W
Power consumption (standby)15 W
Power consumption (typical)50 W
Sustainability certificatesENERGY STAR
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
CertificationRoHS
Weight and Dimensions IconWeight and Dimensions
Depth226 mm
Width300 mm
Height172 mm
Weight6000 g

Related product manuals