Fujitsu ScanSnap N1800

257
■ Cloning a Scanners Configuration
This section describes how to clone a registered scanners configuration.
1. Press the [Config List] button in the Central Admin Console main
window.
D The [Scanner Config List] window appears.
2. Select the check box for the scanner to be cloned.
3. Press the [Clone] button.
D The [Edit Scanner Details] window appears.
4. Check and edit the scanner configuration.
5. Press the [OK] button.
D The scanner configuration is added.
■ Editing Scanner Configuration
This section describes how to edit scanner configuration.
1. Press the [Config List] button in the Central Admin Console main
window.
D The [Scanner Config List] window appears.
2. Select the check box for the scanner to be edited.
3. Press the [Edit] button.
D The [Edit Scanner Details] window appears.
4. Change the details of the scanner configuration.
5. Press the [OK] button.
D The changed scanner configuration is saved.