Fujitsu ScanSnap N1800

367
6.9.5 Scan Mode
Set the scan mode for the documents.
1. On the [Scan Settings] window, select the [Basic] tab.
2. Press the [Scan Mode] button.
D The [Scan Mode] window appears.
3. Select [Simplex] if only the front sides of the documents are to be
scanned. Select [Duplex] if both front and reverse sides are to be
scanned.
D This returns you to the [Scan Settings] window. The selected mode is displayed
to the right of the [Scan Mode] button.