Fujitsu ScanSnap N1800 User Manual

159
4.13 Setting the Network Printers
Set a printer connected to the network.
The procedure for setting a network printer is as follows.
1. Check the printer driver.
For details, refer to
"Checking the Printer Drivers" (page 160).
2. Set the printer properties.
For details, refer to
"Setting the Printer Properties" (page 161).
3. Register the network printer.
Up to 100 network printers can be registered.
A network printer can be registered in the following ways.
z Network Tree
Select a network printer from the network tree.
For details, refer to
"Registering a Network Printer (Network Tree)" (page 164).
z Network Path
Directly enter the network printer path name.
For details, refer to
"Registering a Network Printer (Network Path)" (page 167).
Central Admin
Console
z Read the printer manual beforehand for information about setting a printer, adding a
network printer, and other cautions.
z Make sure that there is enough space in the drive before printing.
z Do not set a virtual printer.
z If a printer connected to different print servers is to be registered as a network
printer multiple times, the software version of the driver should be the same on each
print server.
If the software version of the printer driver differs, printing errors may occur.

Fujitsu ScanSnap N1800 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Output color depth	24 bit
ADF scan speed (color, A4)	20 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (color, A4)	20 ipm
Display	TFT
Scanner type	ADF scanner
Product color	Black, Grey
Display diagonal	8.4 \
Display resolution	1024 x 768 pixels
Scan to	E-mail, Fax, File, FTP, Image
Sensor type	CCD
Scan file formats	JPG, PDF, TIFF
Maximum duty cycle	12000 pages per month
Daily duty cycle (max)	2000 pages
Minimum scan area (ADF)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6, A7, A8
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	52 - 127 g/m²
Auto document feeder (ADF) input capacity	50 sheets
Safety	LDAP, LDAPS, FTPS, HTTPS
Cabling technology	10BASE-T, 100BASE-TX
Networking features	Fast Ethernet
Supported network protocols	TCP/IP, DHCP, SMTP, SMB, LDAP, NTP, FTP, HTTP
Input voltage	100-240 V
Power supply type	AC
Power consumption (off)	0.5 W
Power consumption (standby)	15 W
Power consumption (typical)	50 W
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Depth	226 mm
Width	300 mm
Height	172 mm
Weight	6000 g