EasyManuals Logo

Fujitsu ScanSnap N1800 User Manual

Fujitsu ScanSnap N1800
543 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #67 background imageLoading...
Page #67 background image
67
3.1 Operating and Managing Scanners
The administrator can configure and manage the scanner in the following ways.
z LCD touch panel
Scanner settings management can be implemented directly via the scanner's LCD
touch panel.
Setting mode
The administrator can operate the LCD touch panel in the following setting modes.
z Basic mode
A setting mode for Administrators with basic knowledge of computers.
Basic required scanner settings can be performed.
z Advanced mode
A setting mode for Administrators with advanced knowledge of networks and
servers.
Settings which are more advanced than those of Basic mode, such as,
authentication server, server environment, or advanced scanning settings can be
performed.
For details about the configuration of setting modes, refer to
"4.4 Setting the Setting
Mode for the LCD Touch Panel" (page 92)
.
In addition, using the wizard on the LCD touch panel, you can configure minimum
settings required to setup the scanner. You can also use the wizard to restrict the
configurable functions. For details about the configuration with the wizard, refer to
"4.3
Setting the System Settings with the Installation Wizard on the LCD Touch Panel"
(page 90)
.
z Admin Tool
Scanner settings management, and updates can be implemented via the network
interface by using the Admin Tool installed on a computer.
Settings can be performed for one scanner at a time.
z Central Admin Console
Scanner settings management, and updates can be implemented via the network
interface by using the Central Admin Console installed on a computer, for multiple
scanners together.
In this case, settings made with the Central Admin Console are applied to scanners via
a Central Admin Server.

Table of Contents

Other manuals for Fujitsu ScanSnap N1800

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu ScanSnap N1800 and is the answer not in the manual?

Fujitsu ScanSnap N1800 Specifications

General IconGeneral
Film scanningNo
Color scanningYes
Input color depth- bit
Maximum scan size216 x 356 mm
Output color depth24 bit
ADF scan speed (color, A4)20 ppm
Optical scanning resolution600 x 600 DPI
Duplex ADF scan speed (color, A4)20 ipm
DisplayTFT
Scanner typeADF scanner
Product colorBlack, Grey
Display diagonal8.4 \
Display resolution1024 x 768 pixels
Scan toE-mail, Fax, File, FTP, Image
Sensor typeCCD
Scan file formatsJPG, PDF, TIFF
Maximum duty cycle12000 pages per month
Daily duty cycle (max)2000 pages
Minimum scan area (ADF)50.8 x 50.8 mm
ISO A-series sizes (A0...A9)A4, A5, A6, A7, A8
Maximum ISO A-series paper sizeA4
Auto Document Feeder (ADF) media weight52 - 127 g/m²
Auto document feeder (ADF) input capacity50 sheets
SafetyLDAP, LDAPS, FTPS, HTTPS
Cabling technology10BASE-T, 100BASE-TX
Networking featuresFast Ethernet
Supported network protocolsTCP/IP, DHCP, SMTP, SMB, LDAP, NTP, FTP, HTTP
Input voltage100-240 V
Power supply typeAC
Power consumption (off)0.5 W
Power consumption (standby)15 W
Power consumption (typical)50 W
Sustainability certificatesENERGY STAR
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
CertificationRoHS
Weight and Dimensions IconWeight and Dimensions
Depth226 mm
Width300 mm
Height172 mm
Weight6000 g

Related product manuals