Fujitsu ScanSnap N1800 User Manual

5.18 Messages
290
5.18.3 Backup/Restore Command Messages
Backup/restore command messages which may appear during central admin operations
can be arranged into the following two categories:
z Information
z Error
Backup/restore command messages will be shown on the command prompt.
■ Information
■ Error
Code Message Action
0A040001 Starting backup. No action required.
0A040002 Finishing backup.
0A040003 Starting restore.
0A040004 Finishing restore.
Code Message Action
7A040010 Scanner Central Admin
Server is not installed.
Central Admin Server software is not
installed.
Try again in a Central Admin Server
that has been correctly installed.
7A040011 Backup folder has not been
specified.
The backup file name is not specified
in the parameters of the backup
command and restore command.
Specify the backup file, and try again.
7A040012 Backup folder does not exist. Specify the backup folder that was
specified with the backup command,
and try again.
Or, check the read privilege for the
specified backup folder.
7A040013 Backup folder contents are
invalid.
The backup folder specified in the
parameter for the restore command is
not a backup folder for Central Admin
Server. Specify the Central Admin
Server backup folder and try again.

Fujitsu ScanSnap N1800 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Output color depth	24 bit
ADF scan speed (color, A4)	20 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (color, A4)	20 ipm
Display	TFT
Scanner type	ADF scanner
Product color	Black, Grey
Display diagonal	8.4 \
Display resolution	1024 x 768 pixels
Scan to	E-mail, Fax, File, FTP, Image
Sensor type	CCD
Scan file formats	JPG, PDF, TIFF
Maximum duty cycle	12000 pages per month
Daily duty cycle (max)	2000 pages
Minimum scan area (ADF)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6, A7, A8
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	52 - 127 g/m²
Auto document feeder (ADF) input capacity	50 sheets
Safety	LDAP, LDAPS, FTPS, HTTPS
Cabling technology	10BASE-T, 100BASE-TX
Networking features	Fast Ethernet
Supported network protocols	TCP/IP, DHCP, SMTP, SMB, LDAP, NTP, FTP, HTTP
Input voltage	100-240 V
Power supply type	AC
Power consumption (off)	0.5 W
Power consumption (standby)	15 W
Power consumption (typical)	50 W
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Depth	226 mm
Width	300 mm
Height	172 mm
Weight	6000 g