5.13 Viewing the Update Status Lists
272
5.13 Viewing the Update Status Lists
Status details can be viewed for the following update types:
z System Updates
z Add-in Installs
z Scanner Settings
1. Press the [Admin Operations] button in the Central Admin Console main
window.
D The [Scanner Admin Operations] window appears.
2. Select the [Targeted] numeral link in [Scanner-Side Update Status].
D The [Update Status List] window corresponding to the update type appears.
3. To filter scanners shown in the list, specify filter conditions and press
the [Refresh List] button.
4. To issue a call for unapplied updates, select the check box of the
scanners to be notified, and press the [Call Now] button.
All update call targets are "Pending" for [Scanner-Side Update Status].
D A call is issued to the specified scanners.
D If a target scanner is in error status, the error is cleared before notification. The
scanner-side status is changed to "Pending", and becomes an update target.
5. To clear a scanner error, press the check box of the relevant scanner,
and press the [Clear Update Failures] button.
D The error is cleared. The scanner-side status is changed to "Pending", and
becomes an update target.
Select the scanner name link to view the scanner details. For details, refer to
"5.7 Setting Scanner Configuration" (page 251).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
