Fujitsu ScanSnap N1800 User Manual

459
8.3 Other Troubleshooting
This section describes problems that may occur during scanning and gives information on
how to deal with them. Before requesting repair, check the following list of common
problems.
If the problem still cannot be solved after consulting the troubleshooting suggestions,
check the points in
"8.4 Points to Check before Contacting Your FUJITSU Scanner
Dealer" (page 467)
and then contact your FUJITSU scanner dealer or an authorized
FUJITSU scanner service provider.
The possible problems are as follows:
Problem List
■ Scanner cannot be turned on
z " Scanner cannot be turned on." (page 460)
■ Scanner does not start up
z
" The "The last attempt to restart ..." message is shown on the window and the scanner
does not start up." (page 460)
z " Scanner does not resume from standby mode." (page 460)
■ Data cannot be scanned properly
z
" Scanning does not start." (page 461)
z " Even after pressing the top cover Scan button, scanning does not start." (page 461)
z " Multifeed errors occur frequently." (page 462)
z " Paper is not fed into the scanner. (Pick errors are frequent or document feed stops
midway)" (page 462)
■ Scanned data is inappropriate
z
" Scanned data is elongated." (page 463)
z " Shadow on the leading edge of the scanned data." (page 463)
z " Vertical line on the scanned data." (page 463)
z " Scanned data appears skewed or distorted." (page 463)
z " Quality of scanned data is poor." (page 464)
z " Scanned data is partially cut off." (page 464)
z " Scanned data is skewed." (page 464)
■ Cannot login
z
" Cannot login with administrator password." (page 464)
z " The [Login] window is not displayed when connecting via the network." (page 465)
■ Operation does not work
z
" Input field entry entered via the on-screen keyboard does not appear on the window."
(page 465)
z " Saving is not possible after pressing [Save] on the [File Download] dialog box." (page
465)
z " Status window stops at "Printing scan data on ..."." (page 465)
z " An error occurs when installing an Admin Tool." (page 466)

Fujitsu ScanSnap N1800 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Output color depth	24 bit
ADF scan speed (color, A4)	20 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (color, A4)	20 ipm
Display	TFT
Scanner type	ADF scanner
Product color	Black, Grey
Display diagonal	8.4 \
Display resolution	1024 x 768 pixels
Scan to	E-mail, Fax, File, FTP, Image
Sensor type	CCD
Scan file formats	JPG, PDF, TIFF
Maximum duty cycle	12000 pages per month
Daily duty cycle (max)	2000 pages
Minimum scan area (ADF)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6, A7, A8
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	52 - 127 g/m²
Auto document feeder (ADF) input capacity	50 sheets
Safety	LDAP, LDAPS, FTPS, HTTPS
Cabling technology	10BASE-T, 100BASE-TX
Networking features	Fast Ethernet
Supported network protocols	TCP/IP, DHCP, SMTP, SMB, LDAP, NTP, FTP, HTTP
Input voltage	100-240 V
Power supply type	AC
Power consumption (off)	0.5 W
Power consumption (standby)	15 W
Power consumption (typical)	50 W
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Depth	226 mm
Width	300 mm
Height	172 mm
Weight	6000 g