395
6.10 Enabling/Disabling the Scan Viewer
The [Scan Viewer] can be set to appear before the scanned data is processed.
The scanned data can be checked and edited on the [Scan Viewer]. For details, refer to
"6.11 Editing the Scanned Data in the Scan Viewer" (page 398).
If desired, in the following windows, the [Scan Viewer] can be set to appear before the
scanned data is finally processed.
z [Send e-Mail] window
z [Send Fax] window
z [Print] window
z [Save] window
z [Scan to SharePoint] window
z [Job Menu] window
The following explains how to enable or disable the [Scan Viewer] using the [Send e-Mail]
window.
1. On the [Send e-Mail] window, press of [Scan Viewer].
D Pressing the button toggles the setting between [On] and [Off].
When [Scan Viewer] is disabled on the [Job Menu] window, it is not possible to
select whether or not to show the [Scan Viewer].
To Next Page
Loading...
