Fujitsu ScanSnap N1800

4.4 Setting the Setting Mode for the LCD Touch Panel
92
4.4 Setting the Setting Mode for the LCD Touch Panel
Set the setting mode used for configuring or managing system settings via administrator
windows on the LCD touch panel.
For details about setting modes, refer to
"3.1 Operating and Managing Scanners" (page
67)
.
For details of the operations available in each setting mode, refer to
"1.3.1 Operations
with Administrator Right" (page 38)
.
1. On the [Admin Menu] window, press .
D The [Admin Settings] window appears.