4.5 Configuring the System
98
4.5.4 Setting the Date/Time
1. Select [System Settings]
J [Local Settings] J [Date/Time].
D The [Date/Time] window appears.
2. Select a date format.
3. Enter the current date and time in the [Date/Time] input field.
Pressing the [Get Time] button refreshes the [Date/Time] input field with the current
value of the internal system date/time.
4. Press the [OK] button.
D The date and time are set.
Central Admin
Console
For Central Admin Console, the [Date/Time] input field and [Get Time] button
cannot be used.
For the Admin Tool, an adjustment that advances the system time by 20
minutes or more results in a session timeout and causes the scanner to
logout. However, the specified time adjustment will be made.
To Next Page
Loading...
