EasyManua.ls Logo

Fujitsu ScanSnap N1800

Fujitsu ScanSnap N1800
543 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
474
A.2 Paper Quality
Paper Type
The following paper types are recommended for use with the ADF:
z Woodfree paper
z Wood containing paper
When documents of a paper type other than those listed above are scanned, perform the
test-scan with a same paper type first to check if the document can be scanned without
problem.
Paper Weight
The following paper weights can be used with the ADF:
z 52 to 127 g/m
2
(14 to 34 lb)
z For A8 and business card size, 127 g/m
2
only
Precautions
The following documents may not scan successfully:
z Documents of non-uniform thickness (e.g. envelopes and documents with
attachments)
z Wrinkled or curled documents (See the following hint)
z Folded or torn documents
z Documents with appended photographs, notes, etc.
z Tracing paper
z Coated paper
z Carbon paper
z Carbonless paper
z Photosensitive paper
z Perforated or punched documents
z Documents that are not square or rectangular
z Exceptionally thin documents (less than 52 g/m
2
)
Do not attempt to scan the following types of documents:
z Paper-clipped or stapled documents
z Documents on which the ink is still wet
z Documents smaller than A8 Portrait
z Documents wider than 216 mm (8.5 in.)
z Non-paper documents (such as fabric, foil, transparent paper, and plastic card)
z Valuable documents that must not be damaged or dirty, such as certificate and
cash voucher

Table of Contents

Other manuals for Fujitsu ScanSnap N1800

Related product manuals