6.5 Sending the Scanned Data by Fax
324
6.5 Sending the Scanned Data by Fax
1. On the [Main Menu] window, press the [Fax] button.
D The [Send Fax] window appears.
2. Enter a fax number into the [Recipient Fax No.] field.
3. In the [Notification To (Sender's e-Mail Address)] field, enter an e-mail
address to which a notification of the results of the fax sending should
be sent.
For details about e-mail address settings values, refer to
"B.1 e-Mail Address
Setting Values" (page 483)
.
The scan information can be changed by pressing of [Scan Settings]. For
details, refer to
"6.9 Setting the Scan Options" (page 356).
Fax numbers can be selected from the fax number list by pressing .
For details, refer to
"6.5.1 Selecting a Fax Number from the Fax Number List"
(page 327)
.
To Next Page
Loading...
