Fujitsu ScanSnap N1800

207
11. Press the [OK] button.
D A job sequence is added to the [Jobs List] window.
■ Cloning a Job Sequence
This section describes how to clone a job sequence.
1. Press the [Job Sequences] button.
D The [Jobs List] window appears.
2. Select the job sequence to be cloned.
3. Press the [Clone] button.
D The [Job Details] window appears.
4. Clone the detailed job sequence settings.
5. Press the [OK] button.
D A job sequence is added to the [Jobs List] window.
■ Editing a Job Sequence
This section describes how to edit a job sequence.
1. Press the [Job Sequences] button.
D The [Jobs List] window appears.
2. Select the job sequence to be edited.
3. Press the [Edit] button.
D The [Job Details] window appears.
4. Edit the detailed job sequence settings.
5. Press the [OK] button.
D The settings of the job sequence are changed.