Fujitsu ScanSnap N1800

4.17 Setting a Job Sequence
214
■ Cloning a Job Menu
This section describes how to clone a job menu.
1. Press the [Job Menus] button.
D The [Job Menus List] window appears.
2. Select the job menu to view.
3. Press the [Clone] button.
D The [Job Menu Layout] area becomes active.
4. Clone the detailed job menu settings.
5. Press the [OK] button.
D A job menu is added to the [Job Menus List] window.
■ Editing a Job Menu
This section describes how to edit a job menu.
1. Press the [Job Menus] button.
D The [Job Menus List] window appears.
2. Select the job menu to be edited.
3. Press the [Edit] button.
D The [Job Menu Layout] area becomes active.
4. Edit the detailed job menu settings.
5. Press the [OK] button.
D The details of the job menu are changed.