Fujitsu ScanSnap N1800

4.16 Maintaining the System
188
■ Checking for Updates at Scanner Startup
You can set the function for automatically checking for updates each time the scanner is
started.
1. Select [Monitoring & Management] J [Maintenance] J [System Update].
D The [System Update] window appears.
2. Select the [Check for updates at scanner startup.] check box.
■ Requesting e-Mail Notification When a New Update is
Available
The administrator can set to receive an e-mail notification if a new update is released.
1. Select [Monitoring & Management] J [Maintenance] J [System Update].
D The [System Update] window appears.
2. Select the [Check for updates at scanner startup.] check box.
3. Select the [Request e-mail notification when a new update is released]
check box.
D When a new update is released, an e-mail entitled "Event notification from
ScanSnap N1800 Scanner_Name" is sent to the e-mail address that is set in the
[Alert Notification] window. For details about the e-mail address settings for alert
notification, refer to
"4.16.6 Setting the Destination for Alert Notifications" (page
194)
.