Fujitsu ScanSnap N1800

287
5.18 Messages
The following lists the messages that may appear during central admin operations.
5.18.1 Central Admin Console Messages
Window Message Action
Connect Check the port number setting. Enter a port number.
Check the target server setting. Enter a target server.
Connection error Check the connection target
and port number, and try again.
Central
Admin
Console
Network Scanner Admin Tool
could not be started. Check that it
has been installed.
Check that the Admin Tool has
been installed correctly.
Central
Admin
Message
Failed to display window. Restart
Central Admin Console.
Restart Central Admin Console.