Fujitsu ScanSnap N1800

4.9 Configuring the LDAP Settings
128
7. For [Search Timeout], select the LDAP List search timeout delay.
D The selected [Search Timeout] value is displayed.
8. For [Login User Attributes], select login user attributes.
When [Other LDAP Server] is selected for the [Server Type], select whether LDAP
server login users can be searched for by "uid" or "cn".
9. For [LDAP Server Access Authorization], enter an authorized user name
and password when searching for users to be logged in to the LDAP
server, when [Other LDAP Server] is selected for [Server Type].
10. To check the connection with the LDAP server, press the [Connect]
button.
D When the [Server Type] is [Active Directory] or [Active Directory Global Catalog],
the [Authentication] window appears. Enter the authentication details for
confirming access to the LDAP server, and press the [OK] button.
z For the [User Name], alphanumeric characters (case sensitive) and symbols
may be entered.
z Alphanumeric characters and symbols can be used for a password. Passwords
are case sensitive.
D When the [Server Type] is [Other LDAP Server], authentication is performed with
the information that is entered in the [LDAP Server Access Authorization].
D When the authentication is completed and the connection is successful, the
[Login LDAP Server] window appears.
11. Press the [OK] button.
D The information entered is set.