Fujitsu ScanSnap N1800 User Manual

5.10 Installing an Add-in
264
3. In [Add-in Groups], select a group to which the new Add-in module is to
be registered.
D [Registered Add-in Module] shows the details of the currently available Add-in
modules.
4. Press the [Add-in Upload] button.
D The [Add-in Upload] window appears.
5. Press the [Browse] button to specify the Add-in module file.
6. Press the [Upload] button to upload the Add-in module.
7. Press the [Back] button.
D The [Add-in Installs] window appears.
8. Select the [Issue an Update Call] check box to issue an update call.
When the check box is selected, even if a scanner is not started or logged in to, the
Add-in module is sent and applied to the scanner according to the Scanner
Notification Schedule. However, if the update is released while the user is logged in
to a scanner, the update will be applied after the user is logged out. If any other
available updates are pending, those are also applied at the same time.
To cancel release of the Add-in module, press the [Cancel] button to delete the
module.
To install the uploaded Add-in module after uninstalling all Add-in modules
installed in a scanner, select the [Install after uninstalling all current Add-ins]
check box.

Fujitsu ScanSnap N1800 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 356 mm
Output color depth	24 bit
ADF scan speed (color, A4)	20 ppm
Optical scanning resolution	600 x 600 DPI
Duplex ADF scan speed (color, A4)	20 ipm
Display	TFT
Scanner type	ADF scanner
Product color	Black, Grey
Display diagonal	8.4 \
Display resolution	1024 x 768 pixels
Scan to	E-mail, Fax, File, FTP, Image
Sensor type	CCD
Scan file formats	JPG, PDF, TIFF
Maximum duty cycle	12000 pages per month
Daily duty cycle (max)	2000 pages
Minimum scan area (ADF)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6, A7, A8
Maximum ISO A-series paper size	A4
Auto Document Feeder (ADF) media weight	52 - 127 g/m²
Auto document feeder (ADF) input capacity	50 sheets
Safety	LDAP, LDAPS, FTPS, HTTPS
Cabling technology	10BASE-T, 100BASE-TX
Networking features	Fast Ethernet
Supported network protocols	TCP/IP, DHCP, SMTP, SMB, LDAP, NTP, FTP, HTTP
Input voltage	100-240 V
Power supply type	AC
Power consumption (off)	0.5 W
Power consumption (standby)	15 W
Power consumption (typical)	50 W
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Depth	226 mm
Width	300 mm
Height	172 mm
Weight	6000 g