377
4. When [First marked section only] or [All marked sections] is selected in
Step 3, select whether or not to enable editing of character strings in
marked sections at [Edit Marked String].
5. For [Text Recognition Language], select a language used when text is to
be recognized in the document.
6. For [Text Recognition for Pages], specify the target pages for text
recognition.
7. Press the [OK] button.
D This returns you to the [Scan Settings] window. The selected setting is displayed
to the right of the [Text Recognition] button.
z To make detected character strings in marked sections editable, set the [Scan
Viewer] window to appear after scanning. If the [Scan Viewer] window is not
set to appear, editing is not possible.
z When sending as an e-mail attachment, faxing, printing, or saving scanned
data, the [Scan Viewer] window appears, and then a window for editing the
character strings in marked sections appears, allowing the keyword strings to
be edited.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
