7.6 Performing a Scan Test
438
■ Administrator
1. Select [Admin Menu] J [Device Test] J [Scan Test].
D The [Scan Test] window appears.
2. Load the document into the ADF paper chute for the scan test.
3. Press the [Scan] button.
D The scan test starts.
D When the scan test has completed, the [Scan Viewer] window appears.
If the scanner fails to scan correctly, an error message is displayed. Deal with
errors as required.
4. Check the scanned data.
For more details about [Scan Viewer], refer to the following:
"6.11 Editing the Scanned Data in the Scan Viewer" (page 398)
5. Press the [OK] button.
D This returns you to the [Admin Menu] window.
To Next Page
Loading...
