To Next Page

To Previous Page

Section 1

1.4.5 Base Cleaning

Maintenance Schedule

Clean every service call.

Procedure

Chips and paper dust falls to the bottom of the punch. Clean with a vacuum

cleaner each time the machine is serviced. The customer can also do this

between the technician’s visits.

1.4.5.1 Chip Bin

Remove the Chip Bin and empty. Vacuum out paper chips and dust from the Chip

Bin tray [1], especially at the back around the Chip Bin micro switch [2].

[1]

[2]

Front Side

Questions and Answers:

Need help?

Do you have a question about the GBC AdvancedPunch and is the answer not in the manual?

GBC AdvancedPunch Specifications

General