Section 4
4-6 © Copyright 2009 GBC. All rights reserved. Advanced Punch Service Manual
3. Do one of the following.
• To move the door in, move the latch towards the front of the door.
• To move the door out, move the latch away from the front of the door.
4. Tighten the 2 screws [1] and close the door.
5. Test its operation.
4.3.2 Door Latch and Switch Replacement
To replace the door latch:
1. Open the front door.
2. Remove the 2 screws [1].
Figure 4.6 Door Latch and Screws.
To Next Page
Loading...
