P-2 © Copyright 2009 GBC. All rights reserved. Advanced Punch Service Manual
2. Introduction
This service manual is provided for use by an authorized service technician for the
repair and maintenance of the Advanced Punch.
The Advanced Punch is an innovative, labor saving solution for punching paper
in-line and includes the following design features:
• Maximum productivity saver with punching in-line at the speed of the printer!
Does not slow up or stop the print system.
• Quick-change die sets that are self-latching without tools or levers.
• Advanced Punch die sets are available in all of the most common hole
patterns and include an Identifying Label providing user with the hole pattern
and name.
• Convenient storage area for three extra Die Sets located above the sheet
bypass.
• Accurate hole punching with consistent alignment.
With each Advanced Punch, the customer receives a user manual. They are
encouraged to keep this manual for future reference. The information contained in
the user manual is also helpful to the service technician. Please refer to it for
detailed information regarding dies sets, operation or specifications. You will find a
copy of the User Guide at the end of section 8, Installation and Setup.
To Next Page
Loading...
Need help?
General
