GE Datex-Ohmeda S/5 Series - Page 95

3
Document no. M1144953-001
NOTE: * Ensure that the calibration gas and regulator are functioning properly before
calibration. Perform annual maintenance on the regulator as required. For more information
see section “Adjustments and calibrations” in Compact Airway modules slot in E-Modules
Technical Reference Manual.
E-PSM(P) / E-PRESTN SpO
2
finger probe OXY-F-UN
SpO
2
Interconnect Cable OXY-ES3
M-PRESTN SpO
2
finger probe OXY-F4-N or SAS-F4
E-NSATX 40xxxxx-001 Nellcor OxiMax Spo2
interconnect cable
E-NSAT/ M-NSAT Nellcor SpO
2
finger probe with
DOC-10 cable
M-OSAT OxyTip® + Integrated Finger Sensor OXY-F4-N
Hemodynamic modules w/ (T) Temperature test set 884515
Hemodynamic M-Modules w/ (NIBP) Adult NIBP cuff 572435
Adult NIBP cuff hose 877235
E-COP, E-COPSv, M-COP, M-COPSv C.O. Catheter cable 16590
E-COPSv/ M-COPSv SvO
2
simulator 890121
Tonometry Module, E-TONO/ M-TONO Calibration gas and regulator 755580/755534
Sampling line 733251
Luer plug
Pressure manometer
Tonometrics
TM
catheter
TONO-14F or another
suitable TONO-_F catheter
EEG Module, E-EEG/ M-EEG Earphones
EEG simulator 90502
BIS Module, E-BIS/ M-BIS BIS simulator or
BIS Sensor simulator
900509
900508
E-ENTROPY/ M-ENTROPY Simulator for M-ENTROPY N-ES
Entropy sensor cable 8002964
E-NMT/ M-NMT NMT simulator 871251
NMT ElectroSensor 888416
NMT sensor cable 888415
MemCard – Menu 893860 (English)
MemCard – Data 887045 (English)
All M-Modules Screwdrivers
All E-Modules Torx screwdrivers; T8, T10
For product(s) Tool Order No.