GE MEDICAL SYSTEMS - KRETZTECHNIK DRAFT VOLUSON® 730PRO / 730PROV (BT´04)
D
IRECTION KTI105947, REVISION 2 SERVICE MANUAL
Chapter 4 - Functional Checks 4-7
Section 4-4
Functional Checks
For a basic functional check of the system’s different modes, following pages will familiarize you with
image optimization for:
• 2D Mode (B Mode)
• M Mode
-MCFM Mode
• Spectral Doppler Modes
- PW - Pulsed Wave Doppler
- CW - Continuous Wave Doppler
• Color Doppler Modes
- CFM - Color Flow Mode
- PD - Power Doppler
- TD - Tissue Doppler
• Volume Modes
-3D Static
- 4D Real Time
- 4D Biopsy*
- VCI* - Volume Contrast Imaging (A-Plane, C-Plane and VCI Static),
(at systems upgraded to BT´05 only)
- STIC* (at systems upgraded to BT´05 only)
- TUI* (at systems upgraded to BT´05 only)
-VOCAL II*
NOTE: Some software may be considered standard depending upon system configuration.
If any Modes or Options are not part of the system configuration, the check can be omitted.
NOTE: Different menus are displayed depending on which Menu and which Mode is selected.
Some function only appear in the menu area and the status area of the digipots and flip switch controls
if they are available for the selected Probe.
BT Version:
Some Modes or Options are only available at systems that were upgraded to BT´05 (SW 5.x.x).
NOTICE
Not all Options are available on the Voluson® 730Pro V (marked with * in this manual).
To Next Page
Loading...
