GE MEDICAL SYSTEMS - KRETZTECHNIK RAFT VOLUSON® 730PRO / 730PROV (BT´04)
D
IRECTION KTI105947, REVISION 2 SERVICE MANUAL
5-2 Section 5-2 - General Information
Section 5-2
General Information
Voluson® 730Pro / 730ProV is a digital beamforming curved-, linear- and phased array ultrasound
imaging system. It has provisions for analog input sources like ECG and Phono.
A CW-Doppler probe may also be connected and used.
The system can be used for:
- 2D Mode and Color Doppler Imaging (CFM, PD and TD)
- M Mode + MCFM Imaging
- Doppler (PW, CW)
- 3D Mode and Real Time 4D Imaging
- Different combinations of the above modes
Figure 5-1 Voluson® 730Pro / 730ProV Major Components
Monitor
Gel Holder
TGC - Slider Controls
Monitor Controls
Control Console
Front Grip
Lever to rotate and lock
the Control Console
(mounted at the front
below the Console)
Probe Connectors
Foot rest
Brakes to block the
front wheels
(under the foot rest)
Probe storage Connector
(not active for scanning)
Name Plate
Place for ECG Module
Standby switch
3.5” MOD Drive (optional)
DVD/CD+(R)W Drive
Color Printer
CW Connector
To Next Page
Loading...
