GE Voluson 730Pro - Formatting Media; MO Disk Formatter Messages; MO Disk Formatter Window

GE MEDICAL SYSTEMS - KRETZTECHNIK DRAFT VOLUSON® 730PRO / 730PROV (BT´04)
D
IRECTION KTI105947, REVISION 2 SERVICE MANUAL
Chapter 4 - Functional Checks 4-29
4-4-11-1 Formatting Media
a.) Select the “DVD/CD+(R)W and MO Formatting” tool on the left side of the Sonoview screen.
b.) Insert the medium and select the DVD/CD+(R)W
or the MO icon.
By selecting MO cartridge the unit displays the “MO Disk Formatter” window as shown in Figure 4-17.
1.) Select a Format Type from the drop down menu. If desired, mark the Low Level Format icon.
2.) Click the START
button to start the formatting process.
3.) A message box appears on the screen. Confirm with OK
.
4.) When the formatting has been completed, click OK
to continue.
5.) Select the CLOSE
button and press the EXIT key on the control panel to return to the Scan Mode.
To erase/format the backup media, DVD/CD+(R)W or MOD, press the SONOVIEW
key on the Control
panel.
The Sonoview screen appears on the monitor; see: Figure 4-15 on page 4-27.
Figure 4-17 MO Disk Formatter Window
Figure 4-18 MO Disk Formatter messages
DVD/CD+(R)W icon
MO and DVD/CD+(R)W Formatting tool
MO icon
Format Type Selection
Low Level Format Selection
Start Formatting Process