GE MEDICAL SYSTEMS - KRETZTECHNIK DRAFT VOLUSON® 730PRO / 730PROV (BT´04)
D
IRECTION KTI105947, REVISION 2 SERVICE MANUAL
Chapter 3 - Installation 3-17
3-5-9 Bluetooth Printer Connection
Figure 3-17 Bluetooth Printer Connection Scheme
CAUTION
Please observe that the complete Bluetooth Printer Assembly has to be located outside of the
patient environment (acc. IEC 60601-1 / UL 2601-1).
CAUTION
The used printer may not be a medical device. The Bluetooth Printer Set and the Power Supply
of the Bluetooth Printer Adapter is also not a medical device.
The equipment meets the requirements of the EN60950 Standard.
NOTICE
The switch of the printer has to be in ON position before starting the system.
Leave printer switch always in the ON position.
NOTICE
Please use the proper Bluetooth Printer Connection set.
see: Section 9-12 "Optional Peripherals and Accessories" on page 9-25.
To Next Page
Loading...
