GE MEDICAL SYSTEMS - KRETZTECHNIK DRAFT VOLUSON® 730PRO / 730PROV (BT´04)
D
IRECTION KTI105947, REVISION 2 SERVICE MANUAL
Chapter 3 - Installation 3-37
3-7-4-3 HP 5600 Series / Olivetti Job Jet 210 - Printer Settings
1.) Call up the ‘Printer Properties’; operation see: Section 3-7-4 "Adjustment of Printer Settings" .
2.) Select the
GENERAL page and click the PRINTING PREFERENCES... button.
3.) Select the
PAPER/QUALITY page and select the adequate paper size.
4.) For saving the adjusted paper size settings click APPLY
and then OK.
5.) In the next window, click OK
again.
Finally close the ‘Printers’ -window with the close button and exit System Setup with SAVE&EXIT
.
6.) Assign the HP 5600 Series respectively the Olivetti Job Jet 210 printer as Report Printer;
see: Section 3-7-5 "Printer Remote Control Selection" on page 3-38.
7.) Print report page(s) containing measurements.
For operation see Basic User Manual of Voluson® 730Pro / 730ProV.
8.) Turn off the system!
CAUTION
The Bluetooth Connection Set as well as the color printer MUST NOT be installed by the user!
For installation please contact your local distributor or GE service representative.
Figure 3-47 Paper/Quality page
To Next Page
Loading...
